Notice: Diamond Glaze Cracking
December 21, 2008

Thanks to some very astute Diamond Glaze artists, we have tracked a batch of Diamond Glaze™ that did not meet specifications. While there is no health hazard associated with this batch, it does develop cracks if applied thicker than 1/8 inch and allowed to dry below room temperature (less than 70 degrees F).

The batch was bottled on the 13th of November 2008. Any bottles purchased before that date are not affected. We have tested later batches (after the 15th of December 2008) and they do not have this problem. Only 2 and 10 fluid ounce bottles are affected. The batch was small, and we have recalled most of it.

If you purchased a bottle from this batch, U.S. customers can return it for a replacement bottle. Check the bottom of the bottle, if there is a dark green mark (lime green is ok), or no mark at all, you may have a bottle from the November 2008 batch.

Please send it to:

JudiKins Inc.
17803 South Harvard Blvd.
Gardena, California 90248


Don't forget to include your name and address. And because Diamond Glaze™ bottles are hard to seal once opened please secure the bottle in a plastic bag before shipping (the Post Office will thank you for not getting Diamond Glaze™ all over their equipment)
.

While JudiKins did not ship any bottles from this batch to customers outside the United States, it is possible one of our distributors did. If you live outside the USA and purchased a bottle from this batch please contact us by email at: customerservice@judikins.com

| Projects | Sample | FAQ | Contact Us | Where to Buy |

©JudiKins Inc. • Gardena, CA • (310) 515-1115
Office Hours: M-Th (9-4 p.m.) F (9-2 p.m.)